Description
WEH® Inline Breakaway Coupling TSA6 H₂ for bus and truck fueling stations (Inline Installation), 35 MPa
The WEH® TSA6 H2 Inline Breakaway Coupling which is installed inbetween the filling and venting hoses, is also available for bus and truck fueling stations.In the event of accidental deployment, e.g. driving a vehicle from the dispenser with the nozzle remaining in the vehicle fuel port, the coupling will separate the connections between dispenser and hose sealing both ends. This protects largely the receptacle, the fueling nozzle and the dispenser against damage. The detached coupling can be easily reattached and placed back in service after having been function tested.
The WEH® Breakaway Coupling consists of a coupling body, a receptacle insert and a gas recirculation.
On request we also offer complete nozzle-hose-assemblies consisting of a fueling nozzle, a hose set and an inline breakaway coupling.
Features
- Re-usable without factory reservicing
- Installation inbetween the filling and venting hoses
- Small compact design
- Mounting flange
- Eccentric actuation via an allen wrench
Technical Data
Nominal bore (DN) | 12 mm |
Pressure range | PN = 35 MPa | PS = 45 MPa |
Temperature Range | -40 °F up to max. +185 °F |
Breakaway force | 300 - 600 N |
Media inlet | UNF 7/8“-14 male thread, SAE J514, 37° cone |
Gas recirculation | UNF 9/16"-18 male thread, SAE J514, 37° cone |
Material | Corrosion resistant stainless steel, aluminium |
Sealing material | Hydrogen compatible |
Design | With gas recirculation |
Part No. | C1-82323-X01 |
Application
Inline breakaway coupling for H2 bus and truck fueling stations for installation inbetween the filling and venting hoses.
Downloads