Description
Clickmate TVS21 for mounting into pressure plants to protect the vacuum pump, for venting to the outside, for inert/flammable gases and oxygen, welded connection, tube 20x4, 0,2 bar
The Clickmate TVS21 vacuum pressure relief moduleprotects vacuum pumps even more effectively against damage from residual pressures in high-pressure systems. Where a vacuum pump is fitted into a pressurised system that operates at a substantial higher pressure as the permitted operating pressure of the vacuum pump, the TVS21 pressure relief module protects the pump from damage.
If excessive pressure should build up, the vacuum check valve opens and allows the excess pressure to dissipate into the atmosphere.
Even short-lived bursts of inlet pressures up to 6,000 psi (420 bar) can be safely dissipated using the TVS21 pressure relief module up to an excess pressure of 0.2 bar at the outlet to the vacuum pump.
The adaptor for inlet “B” is available with a welded connection (for tube 20x4 mm).
Features
- Effective vacuum pump protection
- For venting to the outside
- Simple design
- Easily integrated into filling plants
- Easy retrofitting due to simple design
- Easy to dismantle and clean
Technical Data
Max. allowable operating pressure PS | 0.2 bar |
Temperature range | +41 °F up to +140 °F |
Media inlet | Tube 20 x 4 mm |
Medium | Inert/flammable gases, oxygen |
Material | Aluminium, brass, stainless steel |
Conformity / Tests / Approvals | Certified by TÜV, BAM-approval on request |
Part No. | C1-106604 |
Application
For mounting into pressure plants, i.e. into gas mixing and control plants with vacuum function, to protect the vacuum pump.