Product Line


Zoom +

Clickmate TW02 for straight tubes, tube OD 65.0 - 68.0 mm, pneumatical actuation, vacuum up to max. 510 psi

Add to Compare
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Sealing irregular or rough surfaces
Description
Clickmate TW02 for straight tubes, tube OD 65.0 - 68.0 mm, pneumatical actuation, vacuum up to max. 510 psi

The Clickmate TW02 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals male tubes and externally threaded components, and can also be used for flushing and filling.

The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.

Only plug the connector onto the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.

The elastic front seal compresses onto the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.

Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request.

Features
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Sealing irregular or rough surfaces
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Technical Data
Max. allowable operating pressure PS Vacuum up to 510 psi (35 bar)
Pilot pressure 6 - 12 bar compressed air
Temperature range +41 °F up to +176 °F
Connects to Tube OD 65.0 - 68.0 mm
Media inlet BSP1 1/2" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation Pneumatic actuation
Material Housing, piston and seal housing: Aluminium
Sealing material Main seal chloroprene / o-rings NBR
For body size 001 main seal and o-rings are NBR.
Urethane seals for high-wear applications are optional, e.g. for threaded applications.
Part No. C1-141984
Application

Quick coupler for pressure testing / vacuum testing of straight tubes (sealing range external tube Ø 65.0 - 68.0 mm). Other applications are:

  • Automated leak tests
  • Threaded connections with pressure converter
  • Leak testing benches
  • Helium testing
  • Pick & place applications in automation technique / automated systems
  • Leakage tests in electric mobility
  • Robotics
Clickmate TW02 Quick coupling sealing beads on
external diameter (connected)
Clickmate TW02 for testing rubber hoses

Recently Viewed

Inquiry List

 

You have no items in your inquiry list.

Read more

Fast test connections for straight tubes and male threads OD 65.0 – 68.0 mm - Clickmate TW02

WEH offers fastest connectors for components with male thread, bead or collar sealing the outside diameter 65.0 – 68.0 mm. The pneumatically actuated quick coupling TW02 is the ideal test fitting for low pressure testing, leak testing, vacuum testing and function testing. It provides fast leak tight connections thanks to the WEH® Jaw Locking Mechanism – Just push to connect. With the TW02 components are tested faster than ever before. The quick release coupling is mainly used for automated connections in testing, fluid filling or flushing applications.

Back to Top