-
WEH® TW110 | Quick & easy filling of refrigerants in automotive air conditioning equipmentThe quick coupler TW110 is a perfect tool for high volume charging of air conditioning units during automobile production. Pressure rated for a MAWP (maximum available working pressure = service pressure) of max. 35 bar, the manual quick release coupling is available in two standard sizes for tube diameters of 11 respectively 13 mms and made of high grade corrosion resistant material.
The WEH® TW110 filling connector is the perfect tool for filling and evacuating refrigerants in automotive climate control systems acc. to SAE J639. It can be connected to beads with an outer diameter of 13 mm.
Thanks to the innovative WEH® Jaw locking mechanism, the safe and pressure tight connection is established in just seconds. Tedious and joint-damaging hand tightening is eliminated, additional sealing tapes are not required.
The connection is established by comfortable actuation of the grip sleeve. The result is an enormous work facilitation - time and costs are saved.
The integrated shut-off valve reduces loss of refrigerant to a minimum. Besides environmental protection, the operator is also protected against frost burns to the hands.
The connector is made of stainless steel and ideally suited for continued use.
- Connection in seconds - Just PUSH to connect
- No tapes, no thread sealants, no hand tightening required
- Unique WEH® Jaw Locking Mechanism
- Reduces connection times and costs
- High-grade materials
Max. allowable operating pressure PS | 510 psi (35 bar) |
Temperature range | +14 °F up to +176 °F |
Connects to | Ø 13 |
Media inlet | G1/4" female thread |
Actuation | Manual actuation via sliding sleeve |
Design | With integrated shut-off valve |
Material | Corrosion resistant stainless steel |
Sealing material | Front seal of HNBR |
Part No. | C1-1749 |
Service quick coupling for filling and evacuating refrigerants in automotive air conditioning equipment - WEH® TW110
The TW110 service fitting / tool connects in seconds to the service port of the air conditioning system. Thanks to the WEH® Jaw Locking Mechanism quick connect and quick disconnect is provided - Just push to connect. The quick coupler is equipped with an integrated stop valve preventing the escape of refrigerant - the ideal tool for achieving high productivity. The filling connector is mainly used for evacuating and charging refrigerants in automotive air conditioning equipment during production.