Video
Description
WEH® Check Valve TVR2-S1-A01 with tube Ø 12 on both sides, DN 10 mm, stainless steel, cone seal
The WEH check valves are out of stainless steel and especially designed for both liquid and gaseous media. The check valve system is designed to minimize the effect that dirt particles have on the components. Due to the sleek, internal aero-dynamic design of the check valve, chatter and flow restriction is greatly reduced.The check valves are available as standard solution with double ferrule fittings for pipe diameters 6 mm up to 50 mm.
All check valves are made from stainless steel. Contact us!
In addition to our extensive standard check valve product range we also develop customer-tailored solution to your specific needs. Please contact us!
Check valve WEH TVR2 is equipped with a FKM seal. Other sealing materials on request. It is the customer‘s responsibility to clarify the media compatibility
Features
- Stainless steel
- High leak tightness
- Seals are protected from the media flow
- Wear and corrosion resistant
- Low-noise opening and closing
- Low cracking pressure
- Max. operating pressure up to 250 bar
Technical Data
Nominal bore (DN) | 10 mm |
Max. allowable operating pressure PS | 3,600 psi (250 bar) |
Cracking pressure PC | 0.5 bar |
Temperature range | -20 °C up to max. +200 °C |
Housing material | Stainless steel |
Spring material | Stainless steel |
Sealing material DW | FKM |
Sealing concept | Cone seal |
Media inlet B1 | Tube Ø 12, double ferrule fitting |
Media outlet B2 | Tube Ø 12, double ferrule fitting |
Leak rate | 1 x 10-4 mbar x l/s |
Flow Direction | B1 -> B2 |
Part No. | C1-171809 |
Application
TVR2 check valves are for use with liquid and gaseous media. The WEH check valves can be used for a large range of applications in mechanical engineering and construction, chemical / pharmaceutical and food industry, materials-handling and medical technology etc.
Downloads