-
WEH® Connector TW02 | A real multi-talent for leak testsLike all WEH® Products the TW02 is extremely durable, easy to maintain and achieves impressive cost savings as a result of excellent productivity gains. Tubes, hoses and many other components can be instantly connected ready for leak testing, vaccum testing, helium testing and function testing. Automated test procedures allow for significant cost reductions and productivity gains.
-
WEH® Connectors | Automated testing simple & efficientWEH provides ideal connections for automation technology. WEH Connectors enable high quantities to be tested for leakage quickly and reliably during production. The TW17 Quick Connector with pneumatic actuation for automated applications and controls connects pressure-tight in seconds to female threads. The TW02 Quick Coupling for automated testing is the ideal tool for connecting to the outer diameter of straight tubes and hoses.
The WEH® TW02 Quick Connector is the perfect tool for pressure and vacuum testing as well as for pressure decay, underwater and helium testing. The Connector reliably and quickly seals male tubes and externally threaded components, and can also be used for flushing and filling.
The pneumatic actuation makes the coupling the ideal choice for quality testing during production and automation of test procedures, thus increasing productivity.
Only plug the connector onto the test piece, apply pilote pressure and the pressure-tight connection is established - in just seconds without tedious hand-tightening. The easy handling creates significant time and cost saving.
The elastic front seal compresses onto the test piece, compensating for possible tolerances in a component‘s size and reliably seals out of round and rough surfaces. The connector only clamps itself firmly over the sealing rubber of the test piece, but does not have any retaining function. Therefore a fixture must be used.
Special versions, e.g. twin connectors for sealing ports in close proximity to each other are available on request.
- Automation possible
- Connection in seconds - Just PUSH to connect
- No tapes, no thread sealants, no hand tightening required
- Increased productivity & Cost reductions
- Sealing irregular or rough surfaces
- Simple seal replacement
- Ergonomic design
- High-grade materials
Max. allowable operating pressure PS | Vacuum up to 510 psi (35 bar) |
Pilot pressure | 6 - 12 bar compressed air |
Temperature range | +41 °F up to +176 °F |
Connects to | Tube OD 41.0 - 44.0 mm |
Media inlet | G1" female thread |
Leak rate | 1 x 10-3 mbar x l/s |
Actuation | Pneumatic actuation |
Material | Housing, piston and seal housing: Aluminium |
Sealing material | Main seal chloroprene / o-rings NBR For body size 001 main seal and o-rings are NBR. Urethane seals for high-wear applications are optional, e.g. for threaded applications. |
Part No. | C1-141975 |
Quick coupler for pressure testing / vacuum testing of straight tubes (sealing range external tube Ø 41.0 - 44.0 mm). Other applications are:
- Automated leak tests
- Threaded connections with pressure converter
- Leak testing benches
- Helium testing
- Pick & place applications in automation technique / automated systems
- Leakage tests in electric mobility
- Robotics
Fast test connections for straight tubes and male threads OD 41.0 – 44.0 mm - WEH® TW02
WEH offers fastest connectors for components with male thread, bead or collar sealing the outside diameter 41.0 – 44.0 mm. The pneumatically actuated quick coupling TW02 is the ideal test fitting for low pressure testing, leak testing, vacuum testing and function testing. It provides fast leak tight connections thanks to the WEH® Jaw Locking Mechanism – Just push to connect. With the TW02 components are tested faster than ever before. The quick release coupling is mainly used for automated connections in testing, fluid filling or flushing applications.