Product Line


Zoom +

WEH® Connector TW04 for Whitworth G1" male thread, manual actuation, max. 725 psi

Add to Compare
  • Pressure-tight connections by hand-tightening
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Description
WEH® Connector TW04 for Whitworth G1" male thread, manual actuation, max. 725 psi

The WEH® Quick Connector TW04 is the perfect tool for pressure and vacuum testing of components with male thread up to 725 psi max, as well as for filling and venting.

Only place the connector onto the threaded port and hand-tighten it until the o-ring seal contacts the test piece - the pressure-tight connection is established. The WEH® TW04 seals without wrenches, sealants or tape saving connection time & costs.

The higher the test pressure, the tighter the WEH® Connector will clamp itself onto the test piece port. The pressure-assisted piston ensures a pressure-tight connection.

Wear-resistant NBR seals meet most industrial requirements and are very durable. The connector is extremely easy to maintain with simple seal replacement and minimizes down-time.

The WEH® TW04 Screw connector is equipped with a swivel joint as standard enabling the connector to be turned into the most convenient position and eliminates any twisting of the media line. This provides the operator with easy and convenient handling.

Features
  • Pressure-tight connections by hand-tightening
  • Simple seal replacement
  • Ergonomic design
  • High-grade materials
Technical Data
Max. allowable operating pressure PS Vacuum up to 725 psi (50 bar)
Temperature range +41 °F up to +176 °F
Connects to G1" male thread
Media inlet G1" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation Hand-tightening
Material Corrosion resistant stainless steel
Sealing material Front seal of polyurethane or NBR
Part No. C1-12446
Application

Screw connector for pressure testing / vacuum testing of components with male thread for the following standard sizes:

  • Whitworth tube thread to ISO 7/1 or DIN EN ISO 228-1 | G1" male thread

The TW04 Screw connector is suitable for testing fittings, fixtures, tubes / pipes, boilers, tanks, radiatiors, hydraulic manifolds / hydraulic blocks, turbine housings and automotive components.

Downloads
Document type Format Size Download
Datasheet PDF 451 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top