Product Line


Zoom +

WEH® Connector TW05, for leak testing, NPT 1/8" female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 75 - 175 psi

Add to Compare
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Unique WEH® Jaw Locking Mechanism
Video
  • WEH® TW05 | Efficient leak testing during series production
    WEH® TW05 | Efficient leak testing during series production
    The leak tightness of pneumatic components is one of the essential quality requirements of series production. The WEH® TW05 Quick Connector has been especially designed for the purpose of leak testing during the manufacturing process. Safe and pressure-tight connections are made in just seconds. With this quick coupling pneumatic components with female threads of the most diverse connection configurations are tested faster than ever before.
Description
WEH® Connector TW05, for leak testing, NPT 1/8" female thread (ANSI/ASME B1.20.1-1983), grip sleeve actuation, 75 - 175 psi

The WEH® TW05 quick connector is the ideal tool for function, pressure and leak testing. Pneumatic components with female thread can thus be tested faster than ever before during series production.

Safe and pressure-tight connections to female threads of the most diverse connection standards can be established in just seconds - without tedious hand tightening.

Connecting and pressurising the test piece with 5 - 12 bar is accomplished in one operation. By simple actuation of the sliding sleeve, the patented WEH® clamping jaws spread apart and grip into the threaded test piece port.Additional sealants are not required. Complex and expensive clamping and testing devices are eliminated.

For automated testing procedures (frequent connections), the TW05 is also available with control housing instead of the sliding sleeve. With this version, actuation is carried out via external control and pressure lines. Thanks to the automated testing procedures, considerable time and cost savings are achieved.

The quick connector pays off within shortest time: Testing times are reduced, workflows improved and productivity is enhanced.

Features
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Unique WEH® Jaw Locking Mechanism
  • Simple seal replacement
  • Ergonomic design
  • Compact design
  • High-grade materials
Technical Data
Max. allowable operating pressure PS 73 - 175 psi (5 - 12 bar) compressed air
Temperature range +41 °F up to +176 °F
Connects to NPT 1/8" female thread
Media inlet NPT 1/4" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation Manual actuation via grip sleeve
Material Clamping jaws: Corrosion-resistant stainless steel
Outer parts: Anodized aluminium
Sealing material Front seal of NBR
Part No. C1-10405
Application

Quick coupler for pressure testing / function testing / leak testing with compressed air at pneumatic components with female threads for the following standard sizes:

  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8" female thread

The TW05 Connector is suitable for testing pneumatic cylinders / mini-cylinders, pneumatic valves, fixtures, air engine, pivot drives, radiators and pneumatic tools. In combination with a control housing it is the ideal tool for automated leak tests. In combination with a control housing it is the ideal tool for automated leak tests.

TW05 testing of automotive filters
TW05 for testing of air engines
Downloads
Document type Format Size Download
Press release PDF 545 KB
Datasheet PDF 334 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top