-
WEH® TW130 | Multiple connection possibilitiesThe WEH® TW130 Quick Connector has been developed specially for pressure and function testing on HVAC-R and hydraulic components with banjo tube connections and hose or tube connections with sleeve nut and similar configrations. The compact design and ease of operation enables cost-effective testing, even for high quantities. The connector is equipped with pneumatic valve actuation, a customer-tailored steel sample holder and if required a retaining plate.
The compact design and ease of operation enables cost-effective testing, even for high quantities. Therefore, the WEH Test Connector is ideal for the automation of test procedures during production, automatic systems and robotics.
The connector is equipped with pneumatic valve actuation, a customer-tailored steel sample holder and if required a retaining plate.
The TW130 is rated for a pressure range up to max.350 bar. Automation is possible. Special versions, e.g. multi-connectors etc. are also available on request.
- Suitable for automated testing
- Connection in seconds - Just PUSH to connect
- No tapes, no thread sealants, no hand tightening required
- Increased productivity & Cost reductions
- Testing of high quantities
- Robust construction
- Ergonomic design
Max. allowable operating pressure PS | 5,000 psi (350 bar) |
Pilot pressure | 90 - 120 psi (6 - 8 bar) |
Temperature range | +14 °F up to +176 °F |
Media inlet | G1/4" female thread |
Actuation | Pneumatic actuation via valve button. Automation possible. |
Material | Base unit: Corrosion resistant stainless steel, anodized aluminium |
Sealing material | Front seal of NBR |
Multi function connector for automated pressure testing / function testing on HVAC-R components / hydraulic components with banjo tube connections and hose / tube connections with sleeve nut.
- Heat exchangers
- High pressure hoses / hydraulic hoses
A quick connect and disconnect for banjo tube connections - WEH® TW130 Test connector
The pneumaticually actuated quick coupling TW130 is the ideal test fitting / tool for pneumatic pressure testing, leak testing and function testing of components with banjo tube connections and tube / hose connections with sleeve nuts. They offer quick connect and quick disconnect - Just push to connect. The TW130 quick connector is mainly used for testing HVAC-R components and hydraulic components for example heat exchangers and high pressure hoses / hydraulic hoses.