Product Line


Zoom +

WEH® Connector TW17H for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1/8" female thread, lever actuation, max. 725 psi

Add to Compare
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Unique WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
Description
WEH® Connector TW17H for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1/8" female thread, lever actuation, max. 725 psi
The WEH® TW17H Quick Connector for leak testing connects to NPT threads.
The higher the test pressure, the tighter the WEH® Connector will clamp itself into the thread of the test piece thus establishing a leak tight connection in just seconds. The front O-ring reliably seals the connection and can be easily replaced at each maintenance.
Additional sealants and sealing tapes are not required.

Time-consuming and expensive clamping and testing devices are eliminated. The TW17H is therefore the ideal tool for frequent connection and disconnection.

Bores have been added as standard to the clamping jaws for body sizes 5 – 6 of the WEH® TW17H Connector for increased medium flow. This modification is also available on request for body sizes 1 – 4. Please contact us.

The WEH® TW17H Connector is equipped with a manual actuation lever and available for low pressure up to max. 725 psi.

Special designs such as longer or shorter versions of the connector, versions with hydraulic actuation, plug versions etc. are available on request.
Features
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Unique WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
  • Automation possible
  • Testing devices are eliminated
Technical Data
Max. allowable operating pressure PS 725 psi (50 bar)
Temperature range +41 °F up to +176 °F
Connects to NPT 1/8" female thread
Media inlet NPT 1/8" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation H = manual actuation of the lever
Material Corrosion resistant stainless steel, anodized aluminium
Sealing material Front seal of NBR
Part No. C1-14716
Application
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:

  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/8” female thread


The TW17H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and hydraulic components.
The WEH TW17H Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.
TW17H Test connector for engines
TW17H Test fitting for hydraulic pumps
TW17H Test fitting for steering racks
Downloads
Document type Format Size Download
Press release PDF 636 KB
Product Information PDF 596 KB
Datasheet PDF 554 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top