Product Line


Zoom +

WEH® Connector TW17V for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1" female thread, pneumatic actuation via valve button, max. 725 psi

Add to Compare
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Unique WEH® Jaw Locking Mechanism
Description
WEH® Connector TW17V for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1" female thread, pneumatic actuation via valve button, max. 725 psi
The WEH® TW17V Quick Connector for leak testing connects to NPT threads.
The higher the test pressure, the tighter the WEH® Connector will clamp itself into the thread of the test piece thus establishing a leak tight connection in just seconds. The front O-ring reliably seals the connection and can be easily replaced at each maintenance.
Additional sealants and sealing tapes are not required.

Time-consuming and expensive clamping and testing devices are eliminated. The TW17V is therefore the ideal tool for frequent connection and disconnection.

Bores have been added as standard to the clamping jaws for increased medium flow.

The WEH® TW17V Connector is equipped with a pneumatic actuation via valve button and available for low pressure up to max. 725 psi.

Special designs such as longer or shorter versions of the connector, versions with hydraulic actuation, plug versions etc. are available on request.
Features
  • Automation possible
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Increased productivity & Cost reductions
  • Unique WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
  • Testing devices are eliminated
Technical Data
Max. allowable operating pressure PS 725 psi (50 bar)
Pilot pressure 90 - 175 psi (6 - 12 bar ) compressed air
Temperature range +41 °F up to +176 °F
Connects to NPT 1" female thread
Media inlet NPT 1" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation V = actuation via valve button
Material Corrosion resistant stainless steel, anodized aluminium
Sealing material Front seal of NBR
Part No. C1-16966
Application
Quick connect / disconnect for pneumatic and hydraulic pressure testing and function testing of components with female thread for the following standard sizes:
  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1” female thread
The TW17V Connector is suitable for automated testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses and, hydraulic components and for automated testing systems, automatic production test benchs and robotics.

The WEH TW17V Test Connector is also used in the field of electric mobility, e.g. for leak tests of the cooling circuit and oil modules of electric motors, battery cases and solar batteries.
TW17V Test fitting for engines
Downloads
Document type Format Size Download
Press release PDF 636 KB
Product Information PDF 596 KB
Datasheet PDF 554 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top