Product Line


Zoom +

WEH® Connector TW18H for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1/4" male thread, lever actuation, max. 5,000 psi

Add to Compare
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Unique WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
Description
WEH® Connector TW18H for NPT thread (ANSI/ASME B1.20.1-1983), NPT 1/4" male thread, lever actuation, max. 5,000 psi
The WEH® TW18H Quick Connector for leak testing connects to NPT male threads (ANSI/ASME B1.20.1-1983).
The TW18H is simply placed onto the connecting thread of the test piece. The clamping jaws firmly grip onto the thread establishing a safe & pressure-tight connection within seconds.
Additional sealants and sealing tapes are not required. Time-consuming and expensive clamping and testing devices are eliminated. The TW18H is therefore the ideal tool for frequent connection and disconnection.
The WEH® TW18H Connector is equipped with a manual actuation lever and available for high pressure up to max. 5,000 psi.
Features
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Unique WEH® Jaw Locking Mechanism
  • Ergonomic design
  • High-grade materials
  • Automation possible
  • Testing devices are eliminated
Technical Data
Max. allowable operating pressure PS 5,000 psi (350 bar)
Temperature range +41 °F up to +176 °F
Connects to NPT 1/4" male thread
Media inlet G1/2" female thread
Leak rate 1 x 10-3 mbar x l/s
Actuation H = manual actuation of the lever
Material Corrosion resistant stainless steel, anodized aluminium
Sealing material Front seal of NBR
Part No. C1-17208
Application

Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:

  • NPT thread (ANSI/ASME B1.20.1-1983) | NPT 1/4" male thread

The TW18H Connector is suitable for testing engine / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems.

TW18H Test fitting for components
with male threads
Downloads
Document type Format Size Download
Datasheet PDF 513 KB

Recently Viewed

Inquiry List

 

You have no items in your inquiry list.

Back to Top