More about this Item
Description
WEH® Connector TW18V for UNF 1/2-20" male thread (SAE J514 JIC 37°), pneumatic actuation via valve button, max. 5,000 psi
The WEH® TW18V Quick Connector for leak testing connects to male threads acc. to SAE J514 JIC 37°.
The TW18V is simply placed onto the connecting thread of the test piece. The clamping jaws firmly grip onto the thread establishing a safe & pressure-tight connection within seconds.
Additional sealants and sealing tapes are not required. Time-consuming and expensive clamping and testing devices are eliminated. The TW18V is therefore the ideal tool for frequent connection and disconnection.
The WEH® TW18V Connector is equipped with a pneumatic actuation via valve button and available for high pressure up to max. 5,000 psi.
The TW18V is simply placed onto the connecting thread of the test piece. The clamping jaws firmly grip onto the thread establishing a safe & pressure-tight connection within seconds.
Additional sealants and sealing tapes are not required. Time-consuming and expensive clamping and testing devices are eliminated. The TW18V is therefore the ideal tool for frequent connection and disconnection.
The WEH® TW18V Connector is equipped with a pneumatic actuation via valve button and available for high pressure up to max. 5,000 psi.
Technical Data
| Max. allowable operating pressure PS | 5,000 psi (350 bar) |
| Pilot pressure | 90 - 175 psi (6 - 12 bar ) compressed air |
| Temperature range | +41 °F up to +176 °F |
| Connects to | UNF 1/2"-20 male thread |
| Media inlet | G1/2" female thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | V = actuation via valve button |
| Material | Corrosion resistant stainless steel, anodized aluminium |
| Sealing material | Front seal of NBR |
Features
- Automation possible
- Connection in seconds - Just PUSH to connect
- No tapes, no thread sealants, no hand tightening required
- Increased productivity & Cost reductions
- Unique WEH® Jaw Locking Mechanism
- Ergonomic design
- High-grade materials
- Testing devices are eliminated
Application
Quick connect / disconnect for pressure testing / function testing of pneumatic components / hydraulic components in the automotive industry / manufacturing industry with male thread for the following standard sizes:
- SAE J514 JIC 37° | UNF 1/2"-20 male thread
The TW18V Connector is suitable for automated testing of engines / engine blocks, tanks, pressure vessels, oil coolers, steering racks, filler cap ports, pressure transducers, aggregates, hoses, cylinders and hydraulic components. The quick coupler is also suitable for installation in automated systems, automatic production test benchs and robotics.
Downloads