WEH® Connector TW52 for residual pressure valves with male thread W21,8x1/14", incl. linear valve, CO2 / refrigerants, grip sleeve actuation, CGA 320, max. 2,175 psi

Zoom +

More about this Item
  • WEH® TW52 | CO2 High Pressure Quick Connect
    WEH® TW52 | CO2 High Pressure Quick Connect
    The WEH® Gas Filling Connector TW52 (with or without a residual pressure valve) has been developed especially for filling gas cylinders with gaseous or liquid CO2 or refrigerants. Connection to the cylinder is made within seconds without tedious screwing and unscrewing, thus preventing RSI resulting in the inflammation of tendons and abrasion of joints. This quick coupling is available for gas cylinder valves acc. to DIN, BS, NG, CGA, etc.
WEH® Connector TW52 for residual pressure valves with male thread W21,8x1/14", incl. linear valve, CO2 / refrigerants, grip sleeve actuation, CGA 320, max. 2,175 psi Even smarter CO2 filling using the WEH® TW52 filling connector.
Specially developed for filling CO2, it works with the medium in either gaseous or liquid state. But it can also be used without problems for filling refrigerants. It is fitted with a TVCO2 linear valve, suitable for use with residual pressure valves and at an operating pressure of up to 2,175 psi (150 bar).

Simply pull back the filling connector’s grip sleeve and place the connector onto the male thread of the cylinder valve until it locks into place. The WEH® jaws grip onto the cylinder thread, ensuring a pressure-tight connection. Chronic problems like wear on joints are now a thing of the past.

The filling connector is particularly suitable for filling 1-litre cylinders: such as soda cylinders, etc. for example.

The filling connection is particularly environmentally friendly when used together with the TVCO2 linear valve. The valve allows you to bleed back and carefully dispose of residual gas and to control the filling procedure and stop it if necessary. The TVCO2 is simply screwed onto the pressure inlet of the connector and the residual gas produced by the venting process can be fully vented via venting hose. This means that almost no CO2 is released in an uncontrolled manner into the atmosphere.

The quick connector is suitable for gas cylinder valves conforming to DIN 477. On request we can provide the connector for other connection ports, such as BS, NF, CGA etc., for non-residual pressure valves and for systems not using linear valves.
Technical Data
Max. allowable operating pressure PS 2,175 psi (max. 150 bar) (TW52 with TVCO₂ linear valve)
Temperature range -40 °F up to max. +104 °F (CO₂)
Connects to W21.8x1/14" male thread, DIN 477
Media inlet G3/8" female thread
Actuation Manual actuation via grip sleeve
Design With RPV pin
Material Corrosion resistant stainless steel and brass
Sealing material EPDM
  • Suitable for filling of CO₂ or refrigerants
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • High safety due to pressure-assisted piston
  • Environmentally friendly - a vent pipe recirculates the vented gas (in conjunction with TVCO₂)
  • Unique WEH® Jaw Locking Mechanism
  • High-grade materials
Quick Connector for filling of gas cylinders with male thread (with a residual pressure valve, incl. linear valve) acc. to DIN 477 with CO₂ or refrigerants.


Document type Download
Read more

High pressure fill coupling for CO2 / refrigerants - WEH® TW52

The manually actuated quick coupling TW52 is the ideal fitting for high pressure CO2 filling of gas cylinders up to max. 200 bar. The quick coupler connects instantly to your residual gas cylinder valve with male thread. They offer quick connect and quick disconnect thanks to the WEH® Jaw Locking Mechanism and the easy to operate grip sleeve. Just push to connect. The TW52 quick release coupling is available for a large variety of national standards (DIN, CGA, BS, NF).