WEH® Filling Rig TS150 linear filling rig for gas cylinders of varying sizes up to 10 l nominal volume

Zoom +

More about this Item
Description
WEH® Filling Rig TS150 linear filling rig for gas cylinders of varying sizes up to 10 l nominal volume The WEH® TS150 linear filling rig is designed for filling gas cylinders of different sizes up to 10 litres nominal volume.
Ease of operation is achieved by integrating a range of WEH® Connectors: e.g. TW54, TW57, TW101 or TW102 to achieve connection and commencement of filling within seconds. This design avoids placing the cylinders on a pallet filling rig. A spring balance supports the weight of the gas cylinders. Cylinders can be connected without hand tightening.

The TS150 is supplied as a single unit but units may be connected in series to make a multiple filling rig or units added to an existing rig if required.

Technical Data
Nominal pressure PN 3,000 psi (200 bar)
4,350 psi (300 bar)
Max. allowable operating pressure PS 3,600 psi (250 bar)
5,440 psi (375 bar)
Test pressure PT 5,440 psi (375 bar)
8,195 psi (565 bar)
Temperature range +41 °F up to +176 °F
+41 °F up to +140 °F (O₂)
Medium Oxygen, nitrogen, CO₂, air, inert gases, medical gases
Material Corrosion resistant
Cylinder support adaptor: galvanized steel
Features
  • Connection in seconds - Just PUSH to connect
  • No tapes, no thread sealants, no hand tightening required
  • Varying cylinder sizes up to 10 litres nominal volume can be filled without additional pedestals, plug-ins or mountings that are necessary for other filling rigs
  • Small footprint
  • Filling of gas cylinders becomes even easier and more efficient
  • Available for wall mounting or optionally for installation on mobile base frame
Application
Linear filling rig for gas cylinders up to 10 litres nominal volume.
Downloads

Downloads

Document type Download
Datasheet