Description
WEH® Filter TSF2 H₂ for installation in H2 fueling stations, with tube Ø 10 on both sides, Filter 40 Micron, 35 MPa
Contaminants in the gas flow can enter the vehicle‘s storage tank during refuelling. These dirt particles in the hydrogen fuel may cause damage to the sealing components. WEH, therefore, offers the WEH® TSF2 H2 Filter Series for clean hydrogen.Solid particles are captured reliably.The filter element can be removed and is re-usable after having been cleaned.
The WEH® TSF2 H2 Filter with double ferrule fitting on both sides is mainly used for fuelling stations and dispensers and is also available for H2 vehicles.
Features
- For hydrogen free of impurities
- Filter insert can be cleaned
Technical Data
Nominal bore (DN) | 8 mm |
Pressure range | PN = 35 MPa | PS = 45 MPa |
Temperature Range | -40 °F up to max. +185 °F |
Media inlet | Tube Ø 10, double ferrule fitting |
Material | Corrosion resistant stainless steel |
Sealing material | Hydrogen compatible |
Filter element | 40 micron |
Design | Incl. fittings (only for check valves with tube fitting) |
Part No. | C1-36033-X01 |
Application
Filter with double ferrule fitting on both sides for installation in H2 fueling stations.
Downloads