Description
WEH® Filter TSF4 H₂ for installation in H2 fueling stations, with tube Ø 1/2" on both sides, Filter 40 Micron, 35 MPa
Contaminants in the gas flow can enter the vehicle‘s storage tank during refueling. These dirt particles in the hydrogen fuel may cause damage to the sealing components. WEH, therefore, offers H2 filter for clean hydrogen. Solid particlesare captured reliably.The filter element can be removed and is re-usable after having been cleaned.
The filter TSF4 H2 with double ferrule fitting on both sides is mainly used in fueling stations and dispensers, but can also be used onboard H2 powered vehicles.
Features
- For hydrogen free of impurities
- Filter insert can be cleaned
Technical Data
Nominal bore (DN) | 9 mm |
Pressure range | PN = 35 MPa | PS = 45 MPa |
Temperature Range | -40 °F up to max. +185 °F |
Media inlet | Tube Ø 1/2", double ferrule fitting |
Material | Corrosion resistant stainless steel |
Sealing material | Hydrogen compatible |
Filter element | 40 micron |
Design | Incl. fittings (only for check valves with tube fitting) |
Part No. | C1-49130-X01 |
Application
Filter with double ferrule fitting on both sides for installation in H2 fueling stations.
Downloads