Product Line


Zoom +

WEH® Fueling Nozzle TK16 H₂ High Flow with data interface for fast filling buses and trucks, self-service, 5,000 psi

Add to Compare
  • Only for refueling of buses and trucks with TN1 H₂ High-Flow receptacle
  • Coding for pressure range / gas type
  • WEH® EASY-TURN swivel joint 240° for operating lever
  • Higher flow rate -> shorter filling times
  • Filling rate approx. 100 - 120 g/sec.
Description
WEH® Fueling Nozzle TK16 H₂ High Flow with data interface for fast filling buses and trucks, self-service, 5,000 psi
WEH® TK16 H2 High-Flow Fuelling Nozzle with Data Interface provides a faster hydrogen refueling solution for buses and trucks.

An increased flow rate achieves even faster filling times.

The actuation lever is located on the integrated swivel joint making it easy to rotate into the optimal actuating position. The actuation lever needs less effort to actuate the nozzle.

Internal coding for pressure range and gas type ensures that the TK16 H2 High-Flow with data interface only fi ts the WEH® TN1 H2 High-Flow Receptacle. Furthermore the fueling nozzle has an interface (IR) for data transfer between vehicle and fueling station.
Features
  • Only for refueling of buses and trucks with TN1 H₂ High-Flow receptacle
  • Coding for pressure range / gas type
  • WEH® EASY-TURN swivel joint 240° for operating lever
  • Higher flow rate -> shorter filling times
  • Filling rate approx. 100 - 120 g/sec.
  • Integrated shut-off valve
  • Integrated interface for data transfer acc. to SAE J2601
  • Compact design
  • Recirculation of the vented gas
  • Plastic thermal protection
Technical Data
Nominal bore DN 8 mm
Pressure range PN = 5,000 psi (350 bar) | PS = 450 bar | PT = 675 bar
Temperature Range -40 °F up to max. +185 °F
Media inlet UNF 9/16"-18 male thread, SAE J514, 37°
Gas recirculation M12x1.5 male thread
Material Corrosion resistant
Sealing material Hydrogen compatible
Design With plastic thermal protection, gas recirculation and data interface acc. to SAE J2601 protocol.
Weight Approx. 5.29 lbs.
Approvals Fuelling nozzle: Certified quality assurance system according to the Pressure Equipment Directive 2014/68/EU and SAE J2600:2002 and SAE TIR 2799
IR data interface: ATEX
Part No. C1-94315
Application
High-Flow fueling nozzle for H2 fast filling of buses and trucks at self-service fueling stations, compatible with receptacles WEH® TN1 H2 High-Flow and TN1 H2 70 MPa.
Downloads
Document type Format Size Download
Datasheet PDF 352 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top