Product Line


Zoom +

WEH® Fueling Nozzle TK17 H₂ 70 MPa with data interface (ATEX) for fast filling cars, single-handed operation, self-service

Add to Compare
  • Left or right single-handed operation
  • Compatible to receptacle WEH® TN1 H2 70 MPa
  • Integrated interface for data transfer acc. to SAE J2601
  • WEH® EASY-TURN swivel joint approx. 250°
  • Easy operation
Video
  • WEH® TK17 H2 | The most popular pistol-grip nozzle
    WEH® TK17 H2 | The most popular pistol-grip nozzle
    With the 700 bar Fueling nozzles by WEH, fuel cell cars can be refueled within 2 to 3 minutes. During refulling, the electric vehicle (FCEV) communicates with the dispenser using the integrated data interface, and passes on information about temperature, pressure and filling level.
Description
WEH® Fueling Nozzle TK17 H₂ 70 MPa with data interface (ATEX) for fast filling cars, single-handed operation, self-service
The WEH® TK17 H2 70 MPa with data interface was developed for refueling fuel cell electric cars with compressed hydrogen (CGH2).

The fueling nozzle with single-handed operation is just as quick and easy to use as the common petrol nozzle and has a similar look and feel.

Simply lift the nozzle from the dispenser mounting and place it onto the vehicle‘s receptacle. 250° rotation makes for easy engagement with the vehicle‘s fuel receptacle. Compress the actuation lever until locking lever engages and the fueling procedure begins. The gaseous hydrogen can only flow through the line if there is a safe connection.
After refueling disengage the nozzle‘s locking lever and disconnect. Please note that refueling may bestopped or paused at any time. The hand grip has a magnet for actuation of the magnet switch for activation of the dispenser.

The WEH® TK17 H2 70 MPa has an an ATEX-interface (IR) for data transfer between vehicle and fueling station. On request the TK17 H2 70 MPa fueling nozzle with data interface is also available with registration acc. to NEC Class 1 Zone 1 (acc. to SAE J2601).

Furthermore the fueling nozzle has a coding specifically for pressure range and gas type and thus the coding will not allow connection to natural gas vehicles or other pressure ranges.
Features
  • Left or right single-handed operation
  • Compatible to receptacle WEH® TN1 H2 70 MPa
  • Integrated interface for data transfer acc. to SAE J2601
  • WEH® EASY-TURN swivel joint approx. 250°
  • Easy operation
  • Extremely high flow rate -> short filling times
  • Plastic thermal protection
  • Hand grip with magnet
  • Unique WEH® Jaw Locking Mechanism
  • High-grade materials
  • Coding for pressure range / gas type
Technical Data
Nominal bore DN 4 mm
Pressure range PN = 700 bar (10,000 psi) | PS = 875 bar | PT = 1255 bar
Temperature Range -40 °F up to max. +185 °F
Media inlet UNF 9/16"-18 male thread, 60° inner cone
Material Corrosion resistant
Sealing material Hydrogen compatible
Design With plastic thermal protection and hand grip with magnet and data interface acc. to SAE J2601 protocol.
Without gas recirculation.
Weight Approx. 3.97 lbs.
Approvals Fuelling nozzle: Certified quality assurance system according to the Pressure Equipment Directive 2014/68/EU and SAE J2600:2002 and SAE TIR 2799
IR data interface: ATEX
Part No. C1-97270
Application
Fueling nozzle with data interface (ATEX) for H2 fast filling of electric / hybrid cars with fuell cells (FCV) at self-service fueling stations.
Downloads
Document type Format Size Download
Datasheet PDF 406 KB
Product Information PDF 3 MB

Recently Viewed

Inquiry List

 

You have no items in your inquiry list.

Read more
Single-handed pistol grip nozzle for safe & easy high-flow hydrogen refueling

The 700 bar Refuelling Nozzle with data interface is designed for filling fuel cell electric vehicles (FCEV). Applications also include quick-fill, self-service fueling of automobiles, light trucks, shuttle buses, vans and vehicle fleets.

Back to Top