Product Line


Zoom +

WEH® Fueling System TS50 CNG for installation in cars (ECE), version 2, tube Ø 8 mm, 3,000 psi

Add to Compare
  • ECE approval available
  • Integrated WEH® TN1 CNG receptacle (NGV1) with filter
  • Integrated starter cut-off micro switch (version 1 + 3)
  • Gas venting via protection hose (version 1 + 2)
  • Different fuel tank caps, acc. to design
Video
  • WEH® TS50 CNG | Fueling System for NGV conversions
    WEH® TS50 CNG | Fueling System for NGV conversions
    The WEH® TS50 CNG fueling system has an integrated NGV1 receptacle. When retrofitting cars to natural gas, the TS50 CNG fueling system is installed into the vehicle body panel. The two housings can be preinstalled within seconds and mounted into the appropriate aperture in the vehicle body panel. The integrated receptacles have ECE approval and feature low noise refueling.
Description
WEH® Fueling System TS50 CNG for installation in cars (ECE), version 2, tube Ø 8 mm, 3,000 psi
WEH offers the fueling system type TS50 CNG for retrofitting of vehicles to run on compressed natural gas.

The TS50 CNG fueling system is a CNG conversion kit for quick and easy installation into the vehicle. The two housings can be preinstalled within seconds. The final installation is possible from the inside or outside of the vehicle.

The type TS50 CNG is equipped with a receptacle with filter compatible with the NGV1 profile.

The TS50 CNG is additionally equipped with a protection hose for gas venting. In case of a gas leakage the gas is diverted away from the connection.

The interior of the fueling system is protected by a fuel tank cap from dirt and splash water thus reducing the danger of freezing.

On request type TS50 CNG is also available without tube for protection hose for gas venting and with starter cut-off micro switch.
Features
  • ECE approval available
  • Integrated WEH® TN1 CNG receptacle (NGV1) with filter
  • Integrated starter cut-off micro switch (version 1 + 3)
  • Gas venting via protection hose (version 1 + 2)
  • Different fuel tank caps, acc. to design
  • Protection against unauthorized use (version 1 + 3)
  • Dirt and splash waterproof construction
  • No danger of freezing
Technical Data
Nominal bore (DN) 8 mm
Pressure range PN = 3,000 psi (200 bar) | PS = 3,770 psi
Temperature Range -40 °F up to max. +248 °F (ECE)
Material Housing: plastic, receptacle: corrosion resistant
Sealing material Natural gas compatible
Design Incl. TN1 CNG receptacle with filter (40 micron),
starter cut-off micro switch (protection type IP679),
tube for protection hose for gas venting, fuel tank cap and fittings
Conformity / Tests / Approvals ECE R110 (applies to TN1 CNG)
Part No. C1-106417
Application
Fueling system for installation in cars. Only use fueling systems with ECE approval for fitment in road legal vehicles.

Recently Viewed

Inquiry List

 

You have no items in your inquiry list.

Back to Top