Video
Description
WEH® Inline Breakaway Coupling TSA2 CNG cars, with gas recirculation UNF 7/16"-20 male thread, inlet UNF 9/16"-18 male thread, 3,600 psi
With TSA2 CNG, an inline breakaway coupling which is installed inbetween the filling and venting hoses, is now also available for car fueling stations.Connection port venting line (dispenser side): UNF 7/16“-20 male thread
Connection port filling line (dispenser side): UNF 9/16“-18 male thread
Connection port filling line (to nozzle): UNF 9/16“-18 male thread
Connection port venting line (to nozzle): UNF 7/16“-20 male thread
The breakaway device consists of a coupling body, a receptacle insert and a gas recirculation.
We recommend the installation of a type TSF5 CNG filter when using the TSA2 CNG inline breakaway coupling. The filter protects your system from dirt ingress.
In the event of accidental deployment, e.g. driving a vehicle from the dispenser with the nozzle remaining in the vehicle fuel port, the coupling will separate the connections between dispenser and hoses sealing both ends. This protects largely the receptacle, the fueling nozzle and the dispenser against damage. The detached coupling can be easily reattached and placed back in service after having been function tested.
Features
- Re-usable without factory reservicing
- Installation inbetween the filling and venting hoses
- Small compact design
- Rubber protection
- Eccentric actuation via an allen wrench
Technical Data
Nominal bore (DN) | 8 mm |
Pressure range | PN = 3,600 psi (250 bar) | PS = 350 bar |
Temperature Range | -40 °F up to max. +185 °F |
Breakaway force | 222 - 660 N |
Material | Corrosion resistant stainless steel, aluminium |
Sealing material | Natural gas compatible |
Design | With gas recirculation |
Part No. | C1-101094-X01 |
Application
Inline breakaway coupling for CNG car fueling stations for installation inbetween the filling and venting hoses.