Product Line


Zoom +

WEH® Inline Breakaway Coupling TSA6 CNG for bus and truck fueling stations (Inline-Installation), 3,000 psi / 3,600 psi - Series

Add to Compare
  • Re-usable without factory reservicing
  • Installation inbetween the filling and venting hoses
  • Small compact design
  • Mounting flange
  • No additional tool necessary
Video
  • WEH® TSA6 CNG  | Breakaway to protect your CNG filling station
    WEH® TSA6 CNG | Breakaway to protect your CNG filling station
    The breakaway allows the vent line hose to safely disconnect, preventing damage to the dispenser in the event of a "drive off". Upon disconnection of the breakaway, flow from the compressor is stopped instantaneously by a valve, the check valve on the vehicle closes automatically preventing flow from the tank.
Description
WEH® Inline Breakaway Coupling TSA6 CNG for bus and truck fueling stations (Inline-Installation), 3,000 psi / 3,600 psi - Series
With type TSA6 CNG, an inline breakaway coupling which is installed inbetween the filling and venting hoses, is now also available for bus and truck fueling stations.

In the event of accidental deployment, e.g. driving a vehicle from the dispenser with the nozzle remaining in the vehicle fuel port, the coupling will separate the connections between dispenser and hoses sealing both ends. This protects largely the receptacle, the fueling nozzle and the dispenser against damage. The detached coupling can be easily reattached and placed back in service after having been function tested.

The breakaway device consists of a coupling body, a receptacle insert and an optional gas recirculation. We recommend the installation of a type TSF5 CNG filter when using the TSA6 CNG inline breakaway coupling. The filter protects your system from dirt ingress.

We also offer complete hose assemblies consisting of a fueling nozzle, a hose set and a breakaway coupling (for complete hose assemblies see respective fueling nozzle).
Features
  • Re-usable without factory reservicing
  • Installation inbetween the filling and venting hoses
  • Small compact design
  • Mounting flange
  • No additional tool necessary
  • Option: without gas recirculation
Technical Data
Nominal bore DN 12 mm
Pressure range PN = 3,000 psi (200 bar) | PS = 4,350 psi | PT = 6,525 psi
PN = 3,600 psi (250 bar) | PS = 350 bar | PT = 525 bar
Temperature Range -40 °F up to max. +185 °F
Breakaway force 300 - 600 N
Material Corrosion resistant stainless steel, aluminium
Sealing material Natural gas compatible
Design With gas recirculation
Registration PED 2014/68/EU
Application
Inline breakaway coupling for CNG bus and truck fueling stations for installation inbetween the filling and venting hoses.
Downloads
Document type Format Size Download
Datasheet PDF 461 KB
Inquiry List

 

You have no items in your inquiry list.

Back to Top