WEH® Quick release nipple TN350 for connector changeover, sliding sleeve actuation, max. 5,440 psi

Zoom +

More about this Item
Description
WEH® Quick release nipple TN350 for connector changeover, sliding sleeve actuation, max. 5,440 psi

When changing over to gas cylinders having different cylinder valves, the filling hose has to be disconnected from the filling connector. The quick release coupling has solved this problem, as each WEH® Connector can use the TK350 Quick Couplingand the corresponding TN350 Quick Coupling Nipple fitted to the filling hose.The quick release system is used for quick changes of WEH® Connectors, either for repair or for a changeover to another type of connector. For example a change from residual pressure to non-residual pressure connectors is easily achieved.No additional swivel joint is necessary with the TK350-TN350.

The quick release system consists of the WEH® Quick Coupling TK350 (without shut-off valve) for direct connection to the WEH® Connectors TW54, TW57 and TW67 and a quick coupling nipple TN350 (without shut-off valve) for connection to the filling hose.The WEH® Coupling TK350 is hand-tightened directly to the WEH® Connector and the TN350 nipple directly to the filling hose. When changing between different cylinder valves merely disconnect coupling and nipple by unlocking the bayonet lock and pulling back the sliding sleeve of the TK350. The TN350 nipple remains mounted to the filling hose and is connected to another WEH® Connector also equipped with the WEH® Quick Relase Coupling TK350. This ensures a quick and easy changeover of filling connectors.

The WEH® Quick Relase Coupling TK350 is equipped with a red indicator ring which is not visible when correctly connected and a bayonet lock for additional safety against accidental disconnection.

Technical Data
Nominal pressure PN 4,350 psi (300 bar)
Max. allowable operating pressure PS 5,440 psi (375 bar)
Test pressure PT 8,195 psi (565 bar)
Temperature range +41 °F up to +176 °F
+41 °F up to +140 °F (O₂)
Media inlet M16x1.5 male thread
Medium Inert/flammable gases, oxygen
Leak rate 1 x 10-3 mbar x l/s
Material Corrosion resistant
Housing: brass
Nipple: corrosion resistant stainless steel (Monel® construction: Ecobrass®)
Sealing material Acc. to gas type
Registration Adiabatic ignition test available
Features
  • Quick changeover of connectors
  • Bayonet lock
  • Suitable for inert/flammable gases and oxygen
  • For 200 and 300 bar applications
  • Can be used as a swivel joint
  • High-grade materials
Application
Quick release system for a quick and easy changeover of WEH® Connectors, whether for repair, to another type or a change from residual pressure to non-residual pressure cylinder valves.
Downloads

Downloads

Document type Download
Datasheet