WEH® Receptacle TN1 H₂ for refueling of cars - Series

Zoom +

More about this Item
WEH® Receptacle TN1 H₂ for refueling of cars - Series The WEH® TN1 H2 Receptacle is designed specifically for hydrogen refueling of fuel cell electric cars.

Due to the internal aerodynamic design the receptacle gives low noise (no high frequency whistle) combined with maximum flow rate and fast filling.

The receptacle is a very durable unit, minimizing maintenance and down-time.

The WEH® TN1 H2 Receptacle has an integrated check valve system which is designed to minimize the effect that dirt particles have on the sealing components within the receptacle. The TN1 H2 is also equipped with a coding for pressure range and gas type.
Technical Data
Nominal bore DN 8 mm
Pressure range PN = 3,600 psi (250 bar) | PS = 350 bar | PT = 525 bar
PN = 5,000 psi (350 bar) | PS = 450 bar | PT = 675 bar
Acc. to design
Temperature Range -40 °F up to max. +185 °F
Material Corrosion resistant
Sealing material Hydrogen compatible
Design With protection cap, integrated check valve and fittings (only for receptacles with tube fitting)
Acc. to design
  • Low-noise refuelling
  • With and without integrated self-cleaning particle filter (50 or 40 micron)
  • Integrated high-flow check valve
  • Sealing-friendly design
  • Coding for pressure range / gas type
Receptacle for refueling of electric / hybrid cars with fuell cells (FCV) with hydrogen.


Document type Download
Read more
Fuelling Receptacles for hydrogen refueling of fuel cell cars

WEH receptacles are ideally suited for use in light and medium storage vehicles, as for example automobiles, fuel cell electric vehicles (FCEV), shuttle buses, vans and electric vehicle fleets.