Description
WEH® Receptacle TN1 H₂ High-Flow for refueling of buses and trucks (e1), with double ferrule fitting, tube Ø 12, 35 MPa
The WEH® TN1 H₂ Receptacle with double ferrule fitting was developed to be used with the WEH® TK16 H₂ High-Flow Fuelling Nozzle, enabling to refuel buses and trucks from now on at cars fueling stations.Refueling with a higher speed occurs either with a TK16 H₂ Fuelling Nozzle or with a TK16 H₂ High-Flow Fuelling Nozzle. Due to the internal aerodynamic design the receptacle gives low noise (no high frequency whistle) combined with maximum flow rate and fast filling. The receptacle is a very durable unit, minimizing maintenance and down-time.
The WEH® TN1 H₂ High-Flow Receptacle has an integrated check valve system which is designed to minimize the effect that dirt particles have on the sealing components within the receptacle. The TN1 H₂ High-Flow is also equipped with a coding for pressure range and gas type.
Features
- e1 approval available
- Flow rate: 100 - 120 g/sec
- Low-noise refueling
- Integrated self-cleaning particle filter (40 micron)
- Integrated high-flow check valve
- Sealing-friendly design
- Coding for pressure range / gas type
Technical Data
Nominal bore (DN) | 8 mm |
Pressure range | PN = 35 MPa | PS = 45 MPa |
Temperature Range | -40 °F up to max. +185 °F |
Material | Corrosion resistant |
Sealing material | Hydrogen compatible |
Filter element | 40 micron |
Design | With protection cap, integrated particle filter (40 micron) and fittings (only for receptacles with tube fitting) |
Conformity / Tests / Approvals | e1 00 0010 (Regulation (EC) No. 79/2009) SAE J2600:2002 |
Part No. | C1-85040 |
Application
High-Flow receptacle with double ferrule fitting for refueling of buses and trucks with hydrogen.
Downloads